Справочник Пользователя для Iomega Network Device
DataSafe NAS User’s Manual
45
n
Adapter:
Lists each adapter by name.
n
Priority:
Lists the priority status for the adapters
in a team (if you have specified a priority). You can
specify that an adapter serve as the Primary or
Secondary adapter within the Adapter Fault
Tolerance function of a team.
specify that an adapter serve as the Primary or
Secondary adapter within the Adapter Fault
Tolerance function of a team.
The
Status
column lists the following states:
n
Active
: The currently active adapter(s) in a team.
Adapters in FEC or GEC mode display this status to
show they are always active.
show they are always active.
n
Standby
: The current standby adapter In a team.
n
Disabled
: The adapter has been removed or is
defective, or the driver has failed to load.
Figure 13 Adapters in a team
The
Team Information
section lists the following
details:
n
IP Address
: Lists the IP Address for the adapter.
n
Team Type
: Lists the team type for the adapter
highlighted in the Adapters in a Team status box.