Справочник Пользователя для Netopia 4542

The screen below is an example. Depending on the type of router you are using, fields displayed in this screen 
may var y.

The Local WAN IP Address is used to configure a NAT public address range consisting of the Local WAN IP 
Address and all its por ts. The public address map list is named Easy-PAT List and the por t map list is named 
Easy-Ser vers.

The two map lists, Easy-PAT List and Easy-Ser vers, are created by default and NAT configuration becomes 
effective.This will map all your private addresses (0.0.0.0 through 255.255.255.255) to your public address. 
These map lists are bound to the Easy Setup Profile. See 

This is all you need to do if you want to continue to use a single PAT, or 1-to-many, NAT configuration.

You use the advanced NAT feature sets by first defining a series of mapping rules and then grouping them into 
a list. There are two kinds of lists -- map lists, made up of dynamic, PAT and static mapping rules, and ser ver 
lists, a list of internal ser vices to be presented to the external world. Creating these lists is a four-step process:

1.

Define the public range of addresses that external computers should use to get to the NAT internal 
machines. These are the addresses that someone on the Internet would see.

2.

Create a List name that will act as a rule or ser ver holder.

3.

Create a map or rule that specifies the internal range of NATed addresses and the external range they are 
to be associated with.

4.

Associate the Map or Server List to your WAN interface via a Connection Profile or the Default Profile.

The three NAT features all operate completely independently of each other, although they can be used 
simultaneously on the same Connection Profile.

                   Connection Profile 1: Easy Setup Profile

         Connection Profile Name:           Easy Setup Profile

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 255.255.255.0
         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PPP Authentication...              PAP
         Send User Name:        tonyf
         Send Password:         ********************

         PREVIOUS SCREEN                    NEXT SCREEN

Return/Enter brings you to next screen.