Справочник Пользователя для IBM 4986B LanProbe
Download New Firmware
Downloading Firmware using an HP-UX Workstation and a Terminal
Downloading Firmware using an HP-UX Workstation and a Terminal
80
Downloading Firmware using an HP-UX Workstation
and a Terminal
and a Terminal
The following instructions assume you are using HP-UX 9.0, or later. Before
upgrading firmware, you must first establish an IP connection between your
HP-UX workstation and LanProbe.
upgrading firmware, you must first establish an IP connection between your
HP-UX workstation and LanProbe.
The following steps are required to download firmware to your LanProbe:
1. “Install New Download Firmware on an HP-UX Workstation” below
2. “Download Firmware to LanProbe” on page 81
2. “Download Firmware to LanProbe” on page 81
Install New Download Firmware on an HP-UX Workstation
To download a new firmware file to LanProbe using an HP-UX workstation and a
terminal, the new firmware file must be copied into the ~tftp directory on your
HP-UX workstation, and the file must be readable by tftp. Typically, the ~tftp
directory is /usr/tftpdir.
terminal, the new firmware file must be copied into the ~tftp directory on your
HP-UX workstation, and the file must be readable by tftp. Typically, the ~tftp
directory is /usr/tftpdir.
For more information on configuration and usage of tftp, refer to your HP-UX
tftp documentation (typically found in an ARPA Services manual).
tftp documentation (typically found in an ARPA Services manual).