Справочник Пользователя для IBM 4986B LanProbe
Installation
Connecting the Probe
39
Figure 3-14: Connecting LanProbe to 10Base-T Networks
Connecting Out-of-Band
Out-of-Band communications with LanProbe are conducted through the serial
port, not over the network. This mode of communications is optional.
port, not over the network. This mode of communications is optional.
The following methods are available for Out-of-Band connections:
z
“Direct Connection”, below
z
z
Direct Connection
To make a direct connection to LanProbe, connect the NetMetrix management
station’s serial port to LanProbe’s RS-232C port using a null modem cable
(Agilent part number 24542G—9-to-25 pin, 24542U—9-to-9 pin, or equivalent).
Figure 3-15 on page 40 shows the direct connection to the probe.
station’s serial port to LanProbe’s RS-232C port using a null modem cable
(Agilent part number 24542G—9-to-25 pin, 24542U—9-to-9 pin, or equivalent).
Figure 3-15 on page 40 shows the direct connection to the probe.