Справочник Пользователя для IBM 4986B LanProbe
Bootp Server Configuration
Configuring the Bootptab File
65
Configuring the Bootptab File
Configure the bootptab file by using the following procedure and any ASCII text
editor to edit one of the files from Table 4-3.
editor to edit one of the files from Table 4-3.
Table 4-3: Bootp Server bootptab Files
1. Enter your IP parameters into the bootptab file for each LanProbe that you
want to configure.
Use this format.
nodename:\
tag=value:\
tag=value:\
...
tag=value
The nodename is the host name of the LanProbe. The nodename can be up to
40 characters long using alpha-numerics, dashes, and dots. Do not use spaces
or underscores in the nodename.
40 characters long using alpha-numerics, dashes, and dots. Do not use spaces
or underscores in the nodename.
Each tag and its associated value is an IP parameter configured for a
LanProbe. Valid tags are listed in Table 4-4 on page 66. You must provide a
set of these tags for each LanProbe that you want to configure (some tags are
optional).
LanProbe. Valid tags are listed in Table 4-4 on page 66. You must provide a
set of these tags for each LanProbe that you want to configure (some tags are
optional).
Bootp Server:
Bootptab File Location
HP 9000 System
/etc/bootptab
Sun SPARC system
/usr/netm/config/bootptab
PC
C:\bootpd\bootptab