Справочник Пользователя для IBM 4986B LanProbe
LanProbe Operation
Restarting the Probe
75
Selecting the Cold Start Menu Item
Use the following procedure to cold start the probe using LanProbe’s Main Menu:
1. Connect a local terminal (or a PC emulation a terminal) to LanProbe. Refer
to “LanProbe Operation” on page 69 for information on connecting a local
terminal.
terminal.
2. Press the CONFIG button once (on the back of the probe) to place LanProbe
into the configuration mode. Use a narrow, pointed object (like a pen) to
press the recessed CONFIG button. LanProbe then displays its Main Menu
on the terminal. Figure 5-18 on page 73 shows LanProbe’s Main Menu.
press the recessed CONFIG button. LanProbe then displays its Main Menu
on the terminal. Figure 5-18 on page 73 shows LanProbe’s Main Menu.
3. Press
8
to execute a cold start and to exit LanProbe’s Main Menu. The cold
start occurs immediately. The Activity and Fault LEDs are turned on during
a cold start. When the cold start completes, the Activity LED flashes to
indicate traffic (if present), the Fault LED turns off, and the ~Line On (or
Power) LED is on.
a cold start. When the cold start completes, the Activity LED flashes to
indicate traffic (if present), the Fault LED turns off, and the ~Line On (or
Power) LED is on.