Справочник Пользователя для RAD Data comm IPmux-11

Chapter 4  Configuration 

Installation and Operation Manual 

4-6 

Configuring IPmux-11 for Management 

IPmux-11 Ver. 2.00 

 

 

 

Network-Eth1 – The network manager accesses IPmux-11 via the 

network port (Ethernet port 1) 

 

User1-Eth2 – The network manager accesses IPmux-11 via the user port 

1 (Ethernet port 2) 

 

User2-Eth3 – The network manager accesses IPmux-11 via the user port 

2 (Ethernet port 3). 

 

Select Link up/down trap, and choose On to enable the management 
station to receive a trap when a link failure (link down) or link recovery (link 
up) occurs. Choose Off to disable Link Up/Down trap. 

 

Select Alarm trap, and choose On or Off to enable or disable sending 

alarm trap to the manager station. 

 

On – The alarm trap is sent to the management station informing of any 

alarm which is not masked (see 

 in Chapter 6). Both 

entry and exit from an alarm state are declared. 

 

Off – No alarm trap is sent to the management station, even if the alarm 

is masked.  

 

Select VLAN tagging, and choose On or Off to consider or ignore the VLAN 
tagging of the management traffic coming from the management station. 

 

Select VLAN ID, and enter the ID of the management station VLAN 

(1–4095). 

 

Select VLAN priority, and enter the priority of the management station 
VLAN (0–7).  

Configuration>System>Management>Manager list 

1. Manager IP address            ... (0.0.0.0) 

2. Manager location              ... (Empty) 

3. Link up/down trap                 (On) 

4. Alarm trap                        (Off) 

5. VLAN tagging                      (Off) 

6. VLAN ID                       ... (0) 

7. VLAN priority                 ... (0) 

 
> 

 
Please select item <1 to 7> 
ESC-prev.menu; !-main menu; &-exit                                   1 Mngr/s