Справочник Пользователя для RAD Data comm IPmux-11
Chapter 4 Configuration
Installation and Operation Manual
4-28 Additional
Tasks
IPmux-11 Ver. 2.00
2. From the Date/Time menu, select Set time, and enter the current time in the
hh:mm:ss format.
3. Select Set date, and enter the current date in the yyyy:mm:dd format.
Configuration>System>Date/time
1. Set time <HH:MM:SS> ... (09:12:06)
2. Set date <YYYY-MM-DD> ... (2004-01-18)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-28. Date/Time Menu
Displaying the IPmux-11 Status
The IPmux-11 software allows displaying information on the physical layer and
bundle connections. This section describes only status information of the IPmux-11
device. For description of IPmux-11 alarms, refer to
The status information is available via the Status menu.
To access the Status menu:
1. From the Main menu, select Monitoring.
1. From the Main menu, select Monitoring.
The Monitoring menu appears.
2. From the Monitoring menu, select Status.
The Status menu appears (see
).
Monitoring>Status
1. Diagnostics loopback
>
2. TDM Physical layer
>
3. ETH Physical layer
>
4. Connection
>
5. System clock
>
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-29. Status Menu
Displaying the Diagnostics Loopback Information
You can view the status of the diagnostics loopback.
To display the diagnostics loopback information:
• From the Status menu, select Diagnostics loopback.
• From the Status menu, select Diagnostics loopback.