Справочник Пользователя для MAXTECH NX-16
3
2.2 Hardware Installation
Installation of this adapter card requires
opening and manipulating your PC. Exercise cau-
tion at all times when working with AC powered
and static-sensitive equipment. Turn off and un-
plug your PC before installation. Discharge any
static electricity from your body by touching any
metal surface.
tion at all times when working with AC powered
and static-sensitive equipment. Turn off and un-
plug your PC before installation. Discharge any
static electricity from your body by touching any
metal surface.
1.
Turn off your computer and all peripherals.
2.
Make a note of the power cord and other
cables connected to your computer and dis-
connect them.
cables connected to your computer and dis-
connect them.
3.
Remove your computer’s cover (refer to
your computer’s owner manual).
your computer’s owner manual).
4.
Select any available expansion slot, and
then remove the slot cover (refer to Figure
1). A 16-bit expansion slot is recommended.
then remove the slot cover (refer to Figure
1). A 16-bit expansion slot is recommended.
5.
Touch the computer chassis before remov-
ing the adapter from its anti-static bag. This
will discharge any static electricity from
your body.
ing the adapter from its anti-static bag. This
will discharge any static electricity from
your body.
Figure 1