Справочник Пользователя для Printronix Integrated Network Interface Card

248 

These commands list the current or working settings for a particular 
section within the command shell. To view stored settings in flash 
memory, insert stored after list. For example, list prn 
shows the current printer settings but list stored prn shows 
the settings in flash memory. Normally these should match. To view 
default settings in flash memory, insert default after list.

list all

Lists all current settings.

list arp

List the current ARP table that the NIC adheres to in a TCP/IP 
network. 

list dest [destination]

List the current destination settings (e.g., names and mapped
I/O ports, models, and logpaths).

list diff

List the differences between the current settings and the stored 
settings in flash memory. Normally, you want these values to 
match, so issue a 

save

 command followed by a 

reset

 

command.

list ifc

Lists the current NIC interface settings (e.g., link integrity).

For the wireless NIC, the WLAN interface settings will also be 
included.  The WLAN parameters are displayed in the following 
manner, after the interface list has been displayed:

WLAN

ifnum

= <

ifnum>

radio

= 

<wireless-card-id>

ssid = 

<

network name>

mode

= <

net-mode>

channel

= <

channel-num>

antenna

= <

antenna-type>