Листовка для Liebert IS-WEBRT3

• Locate the Liebert IntelliSlot bay on your Liebert equip-

ment. You might need to remove a plastic cover.

• Insert the Liebert IS-WEBRT3 Card into the bay.

• Secure the card with the supplied screws.

• Connect the card to your network with a CAT5 Ethernet 

cable.

• Insert the Liebert PSI-RT3 Software CD and install Liebert DeskPro-Net Util-

ity on your computer.

• Start Liebert DeskPro-Net Utility by clicking on 

Start>Programs>NetAgent>DeskPro-Net Utility. The software will 

automatically find and list available Liebert IS-WEBRT3 cards.

• Double-click on a card in the list to launch it.

• Enter an Account (login name) and Password—Record the login and 

password and save them in a safe place.

• Highlight the card in the list and click Configure to change the card’s IP 

address, subnet mask, and gateway settings (see your network administrator 

for the settings).

TheLiebert IS-WEBRT3 card can be used with DHCP or BOOTP, where the sys-

tem assigns an address, but this makes troubleshooting difficult.

• Liebert MultiLink

™

 will communicate with the Liebert IS-WEBRT3 card. The 

software can be configured to shut down a computer system in response to util-

ity power failure and the UPS’ battery backup time.