Справочник Пользователя для Peavey PageMatrix

• Four Zone preset
• 3-pin XLR low-Z mic input

5-pin XLR Aux Mic input
Electronically balanced

• Mic level control +25 dBu full 

scale

• Electronically balanced output

• Transportation Centers
• Convention Centers
• Theme Parks
• Industrial Plants
• Medical Centers
• High Rise Facilities
• Research Facilities
• Hotels and Resorts
• Casinos

5

LED color indicates status of each of 

the four zone presets.

5

Green indicates the zone is 

available. 

5

Red indicates the zone is in 

use.

5

When the microphone “Push to Talk” 

button is pressed, the selected zone 
preset LED turns orange to confirm that 
it is active. Other stations connected to 
the system will indicate RED to confirm   
that the zone preset is in use.

5

Press any zone preset button to select. 

The LED will blink, confirming the 
selection.

5

At power-up, the unit defaults to zone 

one, and after one minute of inactivity 
reverts back to zone one.

5

Hand-held 5-pin mic input is activated 

by pressing the “talk” button.

5

Zone presets can be labeled in the 

appropriate white boxes.

5

If all LEDs flash red at power-up, this is 

an indication that the station has not 
been programmed.

5

If all LEDs flash green at power-up, this 

is an indication that the station has 
beenprogrammed.

5

The Aux mic input (rear panel) is 

always routed to zone preset one. 

-22 dBu

+25 dBu

2.2K Ohms

200 Ohms

20 Hz to 20 kHz (+0, -2 dB)

+48V DC

Greater than 85 dB

55mA at +24V DC

Less than 0.01% at 1 kHz

4" H x 5.2" W x 7.1" D
10.16cm x 13.21cm x 18.03cm