Справочник Пользователя для Gateway E-824R
CHAPTER 3: Operating your Autoloader
www.gateway.com
48
3
From the Autoloader submenu, scroll to Status, then press Enter. A list of
messages similar to the following appears:
messages similar to the following appears:
Viewing the firmware version
To view the current firmware version:
1
From the Main menu, scroll to Status, then press E
NTER
. The Status
submenu opens.
2
Scroll to Autoloader, then press E
NTER
. The Autoloader submenu opens.
3
Scroll to Version, then press E
NTER
. A list of messages appears on the LCD.
The firmware version is listed as Firmware: VX.XX (where X.XX is the current
installed version of the firmware).
installed version of the firmware).
Status
Message
Description
Magazines
L=*
The left magazine is present.
R=*
The right magazine is present.
SCSI ID
A digit 0 through 15
(default 5)
(default 5)
The assigned SCSI ID for the autoloader.
Mode
Random
The change mode is set to Random.
SEQUENTIAL
The change mode is set to Sequential.
BC Reader
Yes or No
A bar code reader is present.
Field
Description
Firmware
The number indicates the firmware version.
EDC
The number indicates the Error Correction Code that was generated
when the firmware was installed. The autoloader uses this number to
make sure that the firmware and the memory holding the firmware
are good.
when the firmware was installed. The autoloader uses this number to
make sure that the firmware and the memory holding the firmware
are good.
HW Rev
The number indicates the hardware version.
ME Rev
The number indicates the mechanical version.