Справочник Пользователя для National Instruments Image Acquisition Software
Chapter 2
Software Overview
©
National Instruments Corporation
2-3
imgGrabArea
Performs a transfer from a continuous
acquisition. Call this function only after
calling
acquisition. Call this function only after
calling
imgGrabSetup
.
Ring and Sequence Functions
Ring and sequence functions start and stop a continuous acquisition of
multiple fields or frames.
multiple fields or frames.
imgRingSetup
Prepares a session for acquiring
continuously and looping into a buffer
list.
continuously and looping into a buffer
list.
imgSequenceSetup
Prepares a session for acquiring a full
sequence into the buffer list.
sequence into the buffer list.
imgSessionStartAcquisition
Starts a session acquisition identified by
the session ID.
the session ID.
imgSessionStopAcquisition
Stops a session acquisition identified by
the session ID.
the session ID.
Signal I/O Functions
Signal I/O functions control the trigger lines on IMAQ devices.
imgSessionTriggerConfigure
Configures an acquisition to start based
on an external trigger.
on an external trigger.
imgSessionLineTrigSource
Configures triggering per line for
acquisition from a line scan camera.
acquisition from a line scan camera.
imgSessionTriggerClear
Disables all triggers on the session.
imgSessionTriggerDrive
Configures the specified trigger line to
drive a signal out.
drive a signal out.
imgSessionTriggerRead
Reads the current value of the specified
trigger line.
trigger line.
imgSessionWaitSignal
Waits for a signal to be asserted. This
function will return when the specified
signal is asserted.
function will return when the specified
signal is asserted.
UM.book Page 3 Monday, July 13, 1998 9:49 AM