Справочник Пользователя для Fluke 2640A

Users Manual

3-22

(-2*c21/c2)/(2*((c1+1)-(c21/c2)*(c1-1)))

(-2*(abs(c1/(c2-c3))))

See Appendix E for syntax definition and more detailed information.

Mx+B scaling multiplies a measurement by a multiplier (M) and then applies an
offset (B). For example, Mx+B scaling of 100x+50 applied to a measured value of
1.15 would result in a reading of 100(1.15)+50=165.

You can configure both analog and computed channels to use Mx+B scaling.

You can save values for M and B in a separate file and load directly from the file
using Setup | Load Mx+B File. See “Configuring Mx+B Scaling from a File” for
more information.

To configure Mx+B scaling, complete the following procedure:

1.

 

Select the desired channels and click the Mx+B button to open the Mx+B
Configuration dialog box. Enter the M and B values.

 

 

ds023s.bmp

2.

 

To have NetDAQ Logger calculate the Mx+B values, click Calculate M, B
from Range Values, and enter the input and scaled range values. Click OK.