Справочник Пользователя для Siemens 3070

Operation with other devices

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Operation with other devices

For information on operation and call number assignment, please refer to ”Reg-
istering other devices“ on page 7.

Registering a Gigaset 3000 Classic handset

®x{ 

<Base No.> [OK]<System Code>[OK] <

press green illuminated key on 

base station

>, <INT No.>

Registering the Gigaset 2000S handset

Handset 

H

(off), press <Base No> and 

H

 (on) simultaneously, 

System Code

 



 

<press green illuminated key on base station> 

(

internal number is assigned automatically 

by the base station

)

Normal telephone (POT)

This connection must be enabled before a normal telephone (POT) can be put 
into service, see "Setting the device type" on page 20.

Registering third-party GAP handsets

Press the green illuminated key on the base station.

Prepare the GAP handset for registration (see the handset operating instruc-
tions). A connection is setup between the base station and the GAP handset. 
The GAP handset is assigned the lowest available internal number. An available 
internal number cannot be selected via the GAP handset.

The display depends on the GAP handset used, as the base station does not 
send display information to GAP handsets.

Activating and deactivating the repeater capability

The Gigaset repeater allows you to double the range of your handset and can 
be used as an accessory for Gigaset 3070/3075isdn. This function allows you 
to activate and deactivate the repeater capability.

Further information can be found in the operating instructions for the Gigaset 
repeater.

Press 



 for selection menus.

Select using [

ˆ

] and [OK]: 

Service Set up 

→ 

Settings

 

→

 

System settings 

→

Spec. function 

→

 

Repeater

.

Set using [OK]: 

9EHIRUHWKHPHQXFRPPDQG

 = ON / no 

9

 = OFF

7RDFWLYDWHSUHVV

 [NEXT]. The handset is then temporarily disabled. To switch 

back, press



[BACK]