Справочник Пользователя для Nortel Networks AN/DC

Installing and Operating AN/DC and ANH-8/DC Systems

3-4

312410-A Rev 00

Position the card with the label facing up and the INSERT arrow
pointing toward the card receptacle.

Insert the card into the receptacle.

Figure 3-2

shows how to insert the Flash memory card in an AN/DC that does

not have a Flash memory card protector installed.

Figure 3-3

shows how to insert the card in an ANH-8/DC.

Gently push the card until it fits snugly into place.

If the card is new, and you did not obtain it from Nortel Networks, you must
format the card before attempting to write to it. You can format the card using Site
Manager software or the

format

command available with the Nortel Networks

Technician Interface. (Refer to Using Technician Interface Software for
instructions.)

Figure 3-2.

Inserting the Flash Memory Card in the AN/DC Receptacle

Caution:

If you attempt to boot without the Flash memory card inserted, the

router will not operate.

RUN
BOOT
DIAG

POWER

AN0015A