Справочник Пользователя для Nortel Networks AN/DC

Installing and Operating AN/DC and ANH-8/DC Systems

3-16

312410-A Rev 00

Figure 3-12.

Local Boot

When you boot the router, its LEDs flash in a particular order. To
interpret the LED sequence and troubleshoot any potential problems,
refer to Chapter 4; then return to Step 5.

At the login prompt, enter the following and press the Return key to log
in to the Technician Interface

(Figure 3-13)

Manager

The Technician Interface prompt (

[1:1]$

) appears after the Technician

Interface mounts the local file system, as shown in

Figure 3-13

. The prompt

indicates the present working directory.

Note:

If the router tries to Local Boot and cannot get a software image, it

attempts to Netboot once. If both the Local Boot and Netboot attempts fail, the
AN Diagnostic Monitor Login prompt appears on the console. In this case, you
or your network administrator must troubleshoot the problem.

Booting Access Node...

Attempting local configuration and boot...

Configuration file '1:config' successfully loaded.

Found image '1:an.exe' on local file system...booting

Image is in compressed format... decompressing

Nortel Networks, Inc. and its Licensors.

AN0071A