Справочник Пользователя для Cabletron Systems EMM-E6 Ethernet

•

the EMM-E6 does NOT provide a natural Subnet Mask that fits your 

host/network identifier scheme.

To modify the Subnet Mask:

1. Use the arrow keys to highlight the appropriate Subnet Mask field.

2. Enter the Subnet Mask in this field in the format of 

XXX

.

XXX

.

XXX

.

XXX, with XXX ranging from 0 to 255.

3. Press the Return key.

4. Repeat steps 1 - 3 for each interface you want to modify.

The IP Address Table now contains Subnet Mask information specific to 
your network.

The Default Gateway is the IP address of the network connection (i.e., 
gateway or another external router) used in forwarding management 
information from the EMM-E6 (e.g., SNMP traps) to a network 
management station.

The Default Interface is the channel that the EMM-E6 uses to access the 
Default Gateway. Make sure to set the Default interface to reflect the 
correct interface channel for the Default Gateway.

CH1Book  Page 6  Wednesday, March 20, 1996  7:48 AM