Справочник Пользователя для Cabletron Systems EMM-E6 Ethernet

This command lets you select the network you want to monitor. The 
choices range from A to F, depending on the configuration of your 
network and the options available from this configuration. For 
example, if you do not have a Media Interface Module running on the 
A Channel, the EMM-E6 automatically disallows Channel A as a 
network selection.

This command lets you select the MMAC hub slot that you want to 
monitor. The choices vary depending on the MMAC chassis you use. 
The far right slot is always slot number one (1).

This command lets you select and view port statistics for ports 1 
through 26 of the device residing in the selected Slot.

The EMM-E6 updates the Device Statistics screen every three seconds by 
default. The EMM-E6 allows you to adjust this frequency in intervals of 
three seconds (maximum frequency is 99 seconds).

To adjust the UPDATE-FREQ:

1. Use the arrow keys to highlight the UPDATE-FREQ command.

2. Press the Shift and + keys together, or just the - key until the desired 

time/frequency appears (this number increments/decrements in 3 
second intervals; minimum = 3 seconds; maximum = 99 seconds). 

3. Press the Return key to set and save the changes to the 

UPDATE-FREQ field.

CH1Book  Page 4  Wednesday, March 20, 1996  7:48 AM