Справочник Пользователя для Barco 26-0405000-00

Input Menu

The figure below illustrates a “pre” menu — the 

Input Acquisition Menu.

Figure 4-4.  Input Acquisition Menu: No File Saved  (sample)

There are two situations in which the 

Input Acquisition Menu can appear:

1.  After a factory reset has been performed, the Input Acquisition Menu 

automatically appears when you first select a source — but prior to pressing 
TRANS for the first time.  As each source button is pressed, the system acquires 
the video and displays the menu.  The following options are available:

Press {

SAVE} to save the source and display the Input Menu, or ...

Press {

INPUT} to display the Input Menu without saving the source.   

In this way, you can quickly acquire and save all nine inputs. 

2.  After TRANS has been pressed for the first time, the Input Acquisition Menu will 

appear when you (a) select a source that has not been previously saved, and (b) 
press 

TRANS to transition that source to Program.  Here also, the menu is 

displayed and you can save the source.   

Once the source has been saved, the 

Input Acquisition Menu will not be shown again, 

unless the system discovers that video is not present.

If you select a source and there is a video mismatch, if video is not present or if the 
acquisition fails, one of the following messages will appear:

Figure 4-5.  Input Acquisition Menu: Mismatch or No Video  (sample)