Справочник Пользователя для Barco 26-0405000-00
PresentationPRO-II • User’s Guide
83
4. Menu Orientation
Remote Control Menu
oÉãçíÉ=`çåíêçä=jÉåì
The figure below illustrates a sample
Remote Control Menu:
Figure 4-50. Remote Control Menu (sample)
The
Remote Control Menu serves two purposes:
•
When using PresentationPRO-II on a standalone basis, the
Remote Control
Menu is used to set communications parameters for downloading software
updates via Ethernet.
updates via Ethernet.
•
When PresentationPRO-II is controlled from an external controller, the
Remote
Control Menu is used to set the unit ID and enable/disable remote control itself.
To access the menu:
•
Press {
REMOTE CONTROL} on the Home Menu.
The following functions are provided:
•
Unit ID — When PresentationPRO-II is controlled from an external controller, this
function sets the ID of the PresentationPRO-II chassis. The ID range is
function sets the ID of the PresentationPRO-II chassis. The ID range is
1 to 32.
Unit IP: 192.168.0.10
Remote Control
Ctrlr IP:
[ Off ]
[ N/A ]
N
A
V
A
V
A
D
D
J
REMOTE CONTROL
Unit ID
[ 1 ]
- - - - - STATUS - - - - -
No Connection
SAVE
Destination
Router
[ Internal ]
[ Undefined ]
H
O
O
M
E
Important
Some external controllers will detect multiple IDs and prompt
the user to correct the problem. Only the first device will
connect to the console. Other devices with conflicting IDs will
be refused a connection.
the user to correct the problem. Only the first device will
connect to the console. Other devices with conflicting IDs will
be refused a connection.