Справочник Пользователя для HP (Hewlett-Packard) 1103
13.
Release the top cover by lifting the front edge until it disengages from the base enclosure.
Reverse this procedure to install the top cover.
Display assembly
Description
Spare part number
25.7-cm (10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers
and cables (select models only), and webcam/microphone module and cable):
and cables (select models only), and webcam/microphone module and cable):
●
WSVGA, anti-glare, LED display assembly in black for use only on Compaq-branded models
634493-001
●
WSVGA, anti-glare, LED display assembly in black for use only on HP-branded models
633496-001
●
WSVGA, anti-glare, LED display assembly in red
633498-001
●
WSVGA, anti-glare, LED display assembly in blue
633499-001
●
WSVGA, anti-glare, LED display assembly in white
633497-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
).
b.
Service access cover (see
).
c.
Keyboard (see
).
d.
Top cover (see
5.
Disconnect the WWAN antenna cables from the WWAN module (see
6.
Disconnect the WLAN antenna cables from the WLAN module (see
).
56
Chapter 4 Removal and replacement procedures