Справочник Пользователя для ASUS P2B-L

IX. ADAPTEC EZ-SCSI UTILITY

3. To create a new partition on the disk device, press Ins. A screen similar to this

appears:

Select SCSI Device to Partition

HA #0 - Target 0
HA #0 - Target 4

QUANTUM   LP105S 910109405
IOMEGA      BETA90

<Ins> Create,  <Del>  Delete,  <F1> Help,  <Esc> Exit

Adaptec SCSI Disk Setup Program v3.33

Logical Drive Info

64
32
85

512

85

head
sectors/track
cylinders
bytes/sector

megabytes

2AEEFh blocks

Type

Start      End      Megs

Create a DOS Partition

Start Cylinder:
End Cylinder:

0

84

The Create a DOS Partition window suggests that you create one partition on
the disk device, equal to its entire capacity. If this is what you want to do, skip
to step 5.

4. To change the size of the partition, use the arrow keys to select Start Cylinder

and End Cylinder, and type in the numbers you want. Partitions up to 2Gigabytes
are supported.

5. When the number of cylinders is what you want, press Esc. When the confir-

mation prompt appears, select Yes and press Enter to create the partition.
To create more partitions on the same disk device, repeat steps 3, 4, and 5. As
you create partitions on the disk, they are added to the window at the upper
right of the screen, as shown here:

Select SCSI Device to Partition

HA #0 - Target 0
HA #0 - Target 4

QUANTUM  LP105S 910109405
IOMEGA     BETA90

<Ins> Create,  <Del>  Delete,  <F1> Help,  <Esc> Exit

Adaptec SCSI Disk Setup Program v3.33

Logical Drive Info

64
32
85

512

85

head
sectors/track
cylinders
bytes/sector

megabytes

2AEEFh blocks

Type

Start      End      Megs

DOS

0

84

85

6. Press Esc to return to the Select SCSI Device to Partition window. If you want

to partition a different disk device, select the device from the list and repeat the
earlier steps.

7. To quit afdisk, press Esc and select Yes to confirm that you want to quit.

Partitioning