Инструкции Пользователя для Brother FAX 870MC
19
I N S T A L L A T I O N
Do not connect a TAD elsewhere on the same phone line—your FAX/MFC
and TAD will both try to control the line.
and TAD will both try to control the line.
Connections
The external TAD must be plugged into the left side of the FAX/MFC, into the
jack labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD into
a wall jack.
jack labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD into
a wall jack.
1
Plug the telephone line cord from the wall jack into the left side of the
FAX/MFC, in the jack labeled LINE.
FAX/MFC, in the jack labeled LINE.
2
Plug the telephone line cord from your TAD into the left side of the
FAX/MFC, in the jack labeled EXT. (Make sure this cord is connected
to the TAD at the TAD’s telephone line jack, and not its telephone set
jack.)
FAX/MFC, in the jack labeled EXT. (Make sure this cord is connected
to the TAD at the TAD’s telephone line jack, and not its telephone set
jack.)
3
Set your external TAD to four rings or less. (The FAX/MFC’s Ring
Delay setting does not apply).
Delay setting does not apply).
4
Record the outgoing message (see below).
5
Set the TAD to answer calls.
6
Set Message Storage (
Function
,
8
,
1
) to VOICE:EXT.
(For FAX 870MC and MFC 970MC only).
7
Set the Answer Mode to TAD:ANSWER MACH.
(For FAX 750 and FAX 770 only.)
On the FAX 870MC and MFC 970MC, set the Answer Mode to
MC:MSG CTR.
(For FAX 750 and FAX 770 only.)
On the FAX 870MC and MFC 970MC, set the Answer Mode to
MC:MSG CTR.