Инструкции Пользователя для Brother FAX 870MC
88
C H A P T E R T E N
Remote Retrieval
This section is for the FAX 870MC and MFC 970MC. (If you have the FAX 770,
please see Chapter 9 for your remote fax options.) You can call your FAX/MFC
from any touch tone phone (or remote Group 3 fax machine) and use a Remote
Access Code and other button presses to retrieve voice (and fax) messages. You can
also program and change some settings for your Message Center.
please see Chapter 9 for your remote fax options.) You can call your FAX/MFC
from any touch tone phone (or remote Group 3 fax machine) and use a Remote
Access Code and other button presses to retrieve voice (and fax) messages. You can
also program and change some settings for your Message Center.
Using Remote Access Code
1
Dial your FAX/MFC phone number from a touch tone phone.
2
When your FAX/MFC answers and beeps, immediately enter your Remote
Access Code.
Access Code.
3
The FAX/MFC signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages
4
The FAX/MFC then prompts you with two short beeps to enter a command.
If you wait longer than 30 seconds to enter a command, the MFC hangs up.
If you enter an invalid command, the FAX/MFC beeps three times.
If you wait longer than 30 seconds to enter a command, the MFC hangs up.
If you enter an invalid command, the FAX/MFC beeps three times.
5
Press
9
0
to reset the FAX/MFC when you finish.
6
Hang up.
If your FAX/MFC is set to MANUAL mode, you can access the Message Center by
waiting about 2 minutes, then entering the Remote Access Code within 30 seconds.
waiting about 2 minutes, then entering the Remote Access Code within 30 seconds.
Changing Remote Access Code
Enter your Remote Access Code when the FAX/MFC picks up your call, so
you can access features remotely. The access code is preset to 159 , but
you can change this.
you can access features remotely. The access code is preset to 159 , but
you can change this.
1
Press
Function
,
8
,
7
.
2
Enter a three-digit number from 000 to 999. The “ ” cannot be changed.
Do not use the same digits that appear in your Fax Receive Code,
Telephone Answer Code, or Personal Mailbox Codes.
Do not use the same digits that appear in your Fax Receive Code,
Telephone Answer Code, or Personal Mailbox Codes.
3
Press
Set
.
4
Press
Stop
to exit.
See Operation
from Extension
Telephone
p. 39