Справочник Пользователя для Canon 700 Series

Printer Settings

Summar

y

 of Impor

tant Settings

An asterisk (*) indicates the default setting.

3. RX REDUCTION

ON*

OFF

1. RX REDUCTION

AUTO SELECTION*

FIXED REDUCTION

2. SELECT REDUCE DIR

VERTICAL ONLY*

HORIZ & VERTICAL

Receives document images at a reduced size.

Turns ON image reduction.

Turns OFF image reduction.

The machine automatically reduces the image to the selected 
paper size.

You set the reduction percentage (75%, 90%*, 95%, or 97%).

Select the direction of the reduction based on the fixed reduction 
percentage selected above.

Reduction percentage is performed in the vertical direction only.

Reduction percentage is performed in both the horizontal and 
vertical directions.

4. TONER SUPPLY LOW

RX TO MEMORY*

KEEP PRINTING

Sets the machine to continue printing when the message 
<TONER SUPPLY LOW> appears.

The machine stops printing, and receives the remainder of the 
document in memory. To print the document, replace the toner 
cartridge and follow the procedure to print the documents 
received in memory. (See “When the Machine Displays 
<RECEIVED IN MEMORY>,” on p. 9-15.)

Ignores the warning message, and keeps printing the document. 
This setting is convenient when a new toner cartridge is not yet 
available. However, if the toner cartridge is out of toner, the 
machine does not receive the document in memory. You must 
install the new toner cartridge, and set ‘RX TO MEMORY’.