Справочник Пользователя для Olympus LS-14

Inser

ting batt

er

ies

 • 

 Manganese batteries may not be used in this recorder.  

 • 

 Be sure to turn off the recorder before replacing the 
batteries. Unloading the batteries while the recorder is in 
use may cause a malfunction such as corrupting the file, 
etc. If you take out the batteries while recording, you will 
lose your currently recorded file because the file header 
will not be able to close.  

 •  If it takes longer than 15 minutes to replace the 

dead batteries or if you take the batteries in and out 
repeatedly at short intervals, you may have to 
re-enter the battery and time settings. 

 •  Remove the batteries if you are not going to use 

the recorder for an extended period of time. 

 •  When you are playing a file from the built-in 

speaker, the recorder may turn off depending 
on the volume level due to the reduced voltage 
output of the batteries even if [ 

L] is displayed in 

the battery indicator. In this case, lower the volume 
of the recorder.  

 This recorder can be used with AA Alkaline Batteries. 

    

  1  

Press the battery cover release 
button, and then slide the battery 
cover open while lightly pressing it 
down. 

  2  

Insert the batteries, observing the 
correct  

=  and  -   polarities. 

  3  

Close the battery cover completely 
by pushing the cover downwards 
in direction  

A  while sliding it in 

direction  

B . 

 The battery indicator on the display changes as 
the batteries lose power. 

 • 

When  [ 

N ] appears on the display, replace 

the batteries as soon as possible. 
When the batteries are too weak, 
[  Battery  Low  ] will appear on the display and 
the recorder will shut down.