Справочник Пользователя для Olympus LS-14

Inser

ting and ejec

ting an SD car

d

  1  

While the recorder is in stop mode, 
open the card cover. 

  2  

Push the SD card inward to unlock 
it, and let it eject partially. 

 The SD card is visibly out of the slot and can be 
removed safely. 

 •  Quickly moving your finger away after pushing the 

SD card inward may cause it to eject forcefully out 
of the slot. 

 •  Some SD cards or SDHC cards may not be 

recognized correctly depending on the 
manufacturer or type of card due to compatibility 
issues with this recorder. 

 •  See the Olympus website for a list of SD cards 

that have been confirmed to operate with this 
recorder in conditions prescribed by Olympus. The 
website http://olympus-imaging.jp/ introduces 
manufacturers and types of SD cards confirmed 
to be compatible. Please note, however, this 
is not meant to guarantee that SD cards will 
operate. Some SD cards may not be recognized 
correctly due to circumstances such as changes in 
manufacturer specifications. 

 •  Always read the instructions that come with your 

SD card before using it. 

 •  If an SD card is not recognized, remove the SD 

card and then insert it again to see if the recorder 
recognizes the SD card. 

 •  Processing speed may be slower with some types 

of SD cards. Processing performance may also be 
reduced due to repeated writing and deleting. If 
that happens, reformat the SD card ( 

☞   P.78). 

 • 

If you eject the SD card when 
[  Memory  Select  ] is set to [  SD  card  ], 
[  Memory  Select  ] will automatically change 
to [  Internal memory selected  ]. 

  3  

Close the card cover securely. 

 When the write protection switch is set to 
[ LOCK ], you cannot record or erase files. 

 Write protection switch