Справочник Пользователя для Olympus LS-14

Tr

oubleshooting

 The battery is not loaded properly. 

 Verify that the battery polarities  

=  and  -  

are correct ( 

☞   P.15). 

 Battery power is getting low. 

 Replace with new batteries ( 

☞   P.15). 

 The power is off. 

 Turn the power on ( 

☞   P.16). 

 Battery power is getting low. 

 Replace with new batteries ( 

☞   P.15). 

 The power is off. 

 Turn the power on ( 

☞   P.16). 

 The recorder is in HOLD mode. 

 Release the recorder from HOLD ( 

☞   P.17). 

 Low remaining memory. 

 Erase unnecessary files ( 

☞   P.61). 

 The maximum number of files has been 
reached. 

 Move files to a different folder or delete 
unnecessary files (

 ☞  P.48, P.61). 

 An external device is connected to the 
 LINE IN   jack. 

 Disconnect the connecting cord from the 
recorder. 

 An external microphone that must be 
supported by plug-in power is connected 
but [  Plug-in  Power  ] is set to [  Off  ]. 

 Set  [  Plug-in  Power  ] to [  On  ] when an 
external microphone that must be 
supported by plug-in power is connected 
( 

☞  P.67). 

 The earphones are connected. 

 Unplug the earphones to use the 
built-in speaker. 

 The volume level is set to [  00  ].  

 Adjust the volume level ( 

☞   P.40). 

 The recording level has not been adjusted. 

 Adjust the recording level and then try 
recording once morel ( 

☞   P.31). 

 The recording sensitivity is too low. 

 Set [  Mic  Gain  ] to [  Hi  ] or [  Mid  ]  (

☞ P.66). 

 This could potentially be because the 
output level for the connected external 
devices is too low.  

 Adjust the output level for the
connected devices.