Справочник Пользователя для TEAC LP-R550USB

Before use, completely loosen the screw by turning it clockwise 
with a coin or screwdriver.

When you transport the unit, turn the screw counterclockwise to 
secure the turntable.

Use this lever to lift the tone arm.

Gently push the clamper to the right to release the tone arm.

Select the speed suitable for the record.

When you move the tone arm to inside, the turntable will begin 
to turn.

Before use, detach the 
stylus guard (white 
plastic cover) by pulling it 
straight off the front of the 
cartridge in the direction of 
the arrow.

  PLAY (y)

Use this button to play a tape.

  F.FWD (,)

Use this button to fast-forward a tape.

  REW (m)

Use this button to rewind a tape.

  STOP (H)

Use this button to stop playing a tape.

  PAUSE (J)

Use this button to suspend playing/recording temporarily.

Never  press  the  PLAY  button  (y)  and  REW  button  (m)  at 
the same time.

Insert a cassette tape with the exposed tape in front and the side 
you want to play facing up.

When  playing  a  normal  tape  (type 

I),  set  the  TAPE  switch  to 

NORMAL.  When  playing  a  chrome  tape  (type 

II) or metal tape 

(type 

IV), set the switch to HIGH.

Connect this unit to a USB port on your computer so that sound 
signals from the unit are converted into digital data and sent to 
the computer.

Turn this knob to adjust the sound level for digital conversion.

When playing a 45 RPM large-hole single record, use the adaptor.
To remove the adapter, slide the stopper for holding the adapter 
to the side.

During use

Side view of transport locking screw

During transport 
(when shipped 
from the factory)