Справочник Пользователя для KYOCERA 3040

6-6

Appendix

This section describes copying onto special paper and copy media. 

The following paper and media can be used.

Transparencies 

Preprinted paper

Bond paper

Recycled paper

Thin paper (from 45 g/m² to 64 g/m² or less)

Letterhead

Colored paper

Prepunched paper

Envelopes 

Postcards

Thick paper (from 106 g/m² to 200 g/m² or less)

Label paper

Rough paper

High-quality paper

When using these paper and media, choose that are designed 
specifically for copiers or page printers (such as laser printers). Use the 
MP tray for transparencies, thin paper, envelopes, and postcards.

Although special paper that meets the following requirements can be 
used with the machine, copy quality will vary considerably due to 
differences in the construction and quality of special paper. Thus, special 
paper is more likely than regular paper to cause copying problems. 
Before purchasing special paper in volume, try testing a sample to 
ensure the copy quality is satisfactory. General precautions when 
copying onto special paper are given below. Note that we are not 
responsible for any harm to the user or damage to the machine caused 
by moisture or specifications of special paper.

When using special paper, set the media type to use the cassette or MP 
tray. (Refer to Setting Media Type and Paper Size for the Cassettes and 
MP Tray in Chapter 2 of Operation Guide.)

Transparencies must be able to withstand the heat of copying. 

Transparencies must meet the following conditions.

To avoid problems, use the MP tray for transparencies and load 
transparencies with the long side facing the machine. 

If transparencies jam frequently, try pulling the leading edge of sheets 
gently as they are ejected.

Heat resistance

Must withstand at least 190 °C.

Thickness

0.100 to 0.110 mm

Material

Polyester

Dimensional accuracy

±0.7 mm

Squareness of corners

90° ±0.2°