Справочник Пользователя для 3M C3266PW
3M™ Multi-Touch Chassis Display User Guide
13
3M Touch Systems, Inc. Proprietary Information – TSD-39373 REV E
Connecting the Touch Display
Note:
You are cautioned that any change or modification to the equipment not expressly
approved by the party responsible for compliance could void your warranty.
To connect the Multi-Touch Chassis Display:
1.
Turn off your computer. You should always turn off the computer before connecting
or disconnecting a device.
or disconnecting a device.
On/Off AC Input USB Serial Serial Display HDMI DVI VGA Audio
touch touch Out & In Port In & Out
2.
Select either the DVI or VGA or HDMI cable. Connect one end of the video cable to
the video connector on the display. Connect the other end to the video card in your
computer.
the video connector on the display. Connect the other end to the video card in your
computer.
3.
Connect one end of the touch sensor cable (either USB or serial) to the LCD.
Connect the other end to an available port on your computer.
Connect the other end to an available port on your computer.
Note:
Do not connect both USB and serial cables to the display. Choose one or the
other.
4.
Connect the power cable to an appropriate grounded power source.
Multimedia Features
The C3266PW Multi-Touch Display comes with speakers built into the back of the
display housing and includes audio cables. These cables can be connected underneath the
display.
display housing and includes audio cables. These cables can be connected underneath the
display.
Testing the Multi-Touch Chassis Display
Note:
The Multi-Touch Chassis Display has a power status light and video controls
located on the side of the display.
Before testing your touch display, make sure all cables are connected properly. Be sure
to tighten all cable screws. After connection, turn on the power switch located on the
back of the display.
to tighten all cable screws. After connection, turn on the power switch located on the
back of the display.
To test that the display is working properly:
1.
Turn on your computer.