Справочник Пользователя для Cisco Systems FE-511-K9

Скачать
Страница из 32
 
2
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
  Product Overview
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you 
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar 
with standard practices for preventing accidents. Use the statement number provided at the end of 
each warning to locate its translation in the translated safety warnings that accompanied this device. 
Statement 1071
SAVE THESE INSTRUCTIONS
Product Overview
This section contains the following topics:
Note
The minimum software release required for the inline network adapter is WAAS 4.0.7.
Inline Network Adapter Description
The WAE appliance supports one optional 4-port Ethernet inline network adapter. The inline network 
adapter is a full-height, three-quarter-length PCI-X network interface card that contains four 
independent Gigabit Ethernet ports. (See 
Figure 1
Inline Network Adapter
The Cisco WAE inline network adapter provides an inline traffic interception capability for your 
appliance. When you configure the WAE appliance for inline interception mode, you can set attributes 
to control which interfaces are to be used over which VLANs. By default, the adapter operates on all 
inline-capable interfaces and VLANs. You can configure the inline redirection feature using the WAAS 
4.0.7 CLI or the WAAS 4.0.7 Central Manager GUI.
159701