Справочник Пользователя для Marantz SR7300OSE

Pro Logic 

II

-Music mode creates a rich and enveloping surround

ambience from stereo sources such as CDs.
In this

 

mode, SR7300 includes three controls to fine-tune the

soundfield as follow.

Select  “

” in SETUP MAIN MENU with   or   cursor

button, and press the 

button.

Select “

” or “

” with   or 

cursor button
If you select  “

”, you can adjust three

parameters as follow

Select the Panorama mode On or Off with   or 
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.

Set the Dimension level between 0 and 6 level in 1
level interval with   or   cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain
recordings.

Set the Center width level between 0 and 7 level in
1 level interval with   or   cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center is
mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “

” was selected for the Center speaker

setting in the Speaker size, then this setting will not
appear.

If you finish the setup in this menu, move cursor to “

” with   or 

cursor buttons and press 

button.

Select  “

 

” in SETUP MAIN MENU with   or   cursor button,

and press the 

button.

To Select desired contents as below, press   or   cursor button

Set the TRUBASS level between 0 and 6 level in 1
level interval with 

or 

cursor button.

TRUBASS produced by the speakers to be an octave
below the actual physical capabilities of the speakers
adding exciting, deeper bass  effects.

Set the SRS DIALOG level between 0 and 6 level in 1
level interval with 

or 

cursor button.

This can be popped out of the surround audio effects
allowing the listener to easily discern what the actors
say.
If “

” was selected for the Center speaker setting

in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with   or 
cursor buttons and press 

button.

SR7300 has some feature to MULTI ROOM SYSTEM as source
selector, OSD information, sleep timer, Multi Room Speaker output
and remote control.
You can set such feature by this sub-menu.

Select  “

” in SETUP MAIN MENU with   or   cursor

button, and press the 

button.

To Select desired contents as bellow , press   or   cursor button

To switch on the Multi-room output ON or
OFF, press   or 

cursor button.

Select the video source of the Multi-room
output with   or   cursor button.

Select the audio source of the Multi-room
output with   or   cursor button.

Select whether the Multi-room output level is
variable or fixed with a   or   cursor button.

Adjust the Multi-room output level with   or 
cursor button.

SLEEP timer function is available during the
multiroom is active, set the time with   or 
cursor button.

Selected input source in the main room will
be displayed.

• If “VOLUME” is set to “FIXED”, the multi-room output level

cannot be adjusted from the second zone.

If you finish the setup in this menu, move cursor to “MAIN” with   or 
cursor buttons and press 

button.