Справочник Пользователя для Intel D845PEMY

Intel Desktop Board D845PEMY Product Guide

BIOS update file contains New BIOS files, BIOS recovery files, and the Intel Flash Memory
Update utility.

You can obtain the BIOS update file through your computer supplier or by navigating to the
D845PEMY page on the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop/

Navigate to the D845PEMY page, click “[

view

]

Latest BIOS updates

”, and select the

Intel Iflash BIOS Update utility file.

NOTE

Review the instructions distributed with the update utility before attempting a BIOS update.

The Intel Iflash BIOS update utility allows you to:
• Update the BIOS in flash memory
• Update the language section of the BIOS

Updating the BIOS

CAUTION

The

AUTOEXEC.BAT

file provided with the update files updates the BIOS. Do not interrupt the

process or the system may not function.

1. Boot the computer with the BIOS update diskette in drive A. During system boot, the

AUTOEXEC.BAT

file provided with the update files will automatically run the BIOS update

process.

2. When the update process is complete, the monitor will display a message telling you to remove

the diskette and to reboot the system.

3. As the computer boots, check the BIOS identifier (version number) to make sure the update

was successful. If a logo appears, press

Esc

to view the POST messages.

Recovering the BIOS

It is unlikely that anything will interrupt the BIOS update, however, if an interruption occurs, the
BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails.
The following procedure uses recovery mode for the Setup program. See page 38 for more
information on Setup modes.

NOTE

Because of the small amount of code available in the boot block area, there is no video support.
You will not see anything on the screen during this procedure. Monitor the procedure by listening
to the speaker and looking at the diskette drive LED.