Справочник Пользователя для Oregon Scientific WMS802
EN
2
NOTE Indoor temperature is measured by the
product’s internal sensors.
product’s internal sensors.
NOTE
After the unit is turned on, it will usually take
between 4 and 15 minutes to acquire the MSN Direct
signal and obtain weather information, depending on
the strength of the signal. If the weather is not displayed
within 15 minutes, please ensure the antenna chord
is fully extended, and either reposition the antenna or
move the unit to another location with better reception.
signal and obtain weather information, depending on
the strength of the signal. If the weather is not displayed
within 15 minutes, please ensure the antenna chord
is fully extended, and either reposition the antenna or
move the unit to another location with better reception.
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well as
technical specifications and warnings you should know
about.
It contains practical step-by-step instructions, as well as
technical specifications and warnings you should know
about.
PRODUCT OVERVIEW
FRONT VIEW
1
2
3
4
1
3
4
2
1. SNOOZE: Activate 8-minute snooze or backlight
2.
2.
/ : Increase / decrease setting; enable /
disable alarm
3. MODE: Change clock settings and clock / sunrise /
sunset display
4. ALARM: View alarm status; set alarm
3. MODE: Change clock settings and clock / sunrise /
sunset display
4. ALARM: View alarm status; set alarm
BACK VIEW
1. RESET: Resets unit to default settings
2. AC adapter hole
3. °C / °F: Selects temperature unit
4. Battery compartment
2. AC adapter hole
3. °C / °F: Selects temperature unit
4. Battery compartment
WMS802_EN_R4.indd 4
2006.12.5 6:56:28 PM