Справочник Пользователя для Oregon Scientific WMR200A

8

EN

 NOTE  Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours 
to get a valid signal.

Press and hold Clock area 

 to enable / disable signal reception.  A beep will 

sound to confirm action.

 NOTE  For best reception, the base station should be placed on a flat, non-metallic 
surface near a window in an upper floor of your home. The antenna should be placed 
away  from  electrical  appliances  and  not  be  moved  around  when  searching  for  a 
signal.

1.  Press Clock area 

 to activate.

2.  Press  SET  to  toggle  between  time  zone  offset,  12/24  hr  format,  hour,  minute, 

year, day / month, month, day, time zone.

3.  Once in desired setting, press UP or DWN to change the settings.
4.  Press:

•  SET to confirm and continue to next setting OR
•  touch panel area (except tool bar) to confirm and exit.

WMR200: Time zone offset sets the clock +/- 23 hours from the received clock signal 
time.

WMR200A: Select the time zone: (PA) Pacific, (EA) Eastern, (CE) Central or (MO) 
Mountain.

 NOTE  The language options are English (E), German (D), French (F), Italian (I), 
and Spanish (S).

Press clock area 

 repeatedly to toggle between:

•  Clock with seconds
•  Clock with weekday
•  Date with year
•  Data logger (please refer to Memory / Data logger section)
 

1.  Press barometer area 

 to toggle between Altitude / current barometer.

2.  Press UNIT to select FEET / M or inHg / mmHg / mb / hPA.

Set the altitude to reflect distance from sea level at your position.

1.  Press

 

 

 to display ALT.

2.  Press SET. 
3.  Press UP / DWN to set the altitude in 10 m (33 ft) increments from -100 m (-328 

ft) to 2500 m (8202 ft).

4.  Press SET or touch panel area (except tool bar / forecast area) to confirm.

Press rain area  

 to toggle between:

•  Rain rate
•  Hourly Rainfall
•  Accumulated rainfall
•  Rainfall recorded in the past 24 hours

Press UNIT to select mm / in.

1.  Press rain area 

 repeatedly until Accumulated Rainfall display. (Clock area 

 will display the start date / time of rainfall recording).

To reset SINCE DATE:
Press and hold MEM to set current time as start of accumulated rainfall records.

The UV index levels are as follows:

0-2

Low

3-5

Moderate

6-7

High

8-10

Very high

11 and above

Extremely high

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 
mile) radius (US- with a 75% accuracy).     

Sunny

Clear night

Partly cloudy

Partly cloudy at night

Cloudy

Rainy

Snowy

1.  Press Indoor 

2.  Press UNIT to select °C / °F.

To auto-scan between sensors (Outdoor):
1.  Press Outdoor Temperature / Humidity area.
2.  Press and hold CH to display data for each sensor. 

To activate the outdoor temperature and humidity auto-scan function:
1.  Press and hold CH to activate auto-scan. The temperature and humidity display 

will scroll from indoor to ch1 through to ch10.

2.  Press CH / MEM to stop the auto-scan.

 NOTE  Channel 1 is used for the outdoor temperature and humidity sensor provided in 
this package. Additional temperature and humidity sensors can use other channels.
To change channel:
Press CH to change channel.

The temperature and humidity trend icons are based on recent sensor readings. 

The trend lines are shown next to the temperature and humidity readings.  The trend 
is shown as follows:

Press Indoor 

 Temperature / Humidity area to display the 

actual temperature felt:

27°C to 32°C 
(80°F to 89°F)

Caution 

Possibility of heat exhaustion 

32°C to 40°C 
(90°F to 104°F)

Extreme Caution

Possibility of heat dehydration