Справочник Пользователя для TEAC DR-H338i

<  Read the instructions of each component you intend to use with this unit.
<  Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords.

A

  Power cord receptacle

After all other connections have been made, insert the supplied 
AC  power  cord  into  this  receptacle,  then  connect  the  other 
end of the power cord into the wall socket. Ensure that your AC 
voltage corresponds to the voltage marked on the rear panel of 
the unit. Consult a qualified electrician if you are in doubt.

 In order to avoid the risk of electric shock, fire, and so on, only 

use the supplied power cord.

<  If you are not going to use the unit for some time, disconnect the 

power cord from the wall socket.

B

  AUX 1/LINE OUT jacks

Analog  2-channel  audio  signal  is  input  or  output  from  these 
jacks.  Connect  a  cassette  tape  deck  etc.  to  these  jacks  using 
commercially-available RCA cables.

Make sure to connect:

White plug 

e

  White jack (L: left channel)

Red plug 

e

  Red jack (R: right channel)

C

D

B

A

RCA cable

Optical digital cable

C

  iPod port

Connect the iPod dock to this port.

D

  Digital audio output terminal

Digital audio from DVD-Video, CD and video CD is output from 
this terminal.
Connect  an  amplifiers  including  a  decoder,  or  digital  audio 
devices such as CD recorders, etc. to this jack using commercially-
available optical digital audio cable (TOS).

<  Select “ALL” or “PCM only” in the DIGITAL AUDIO SETUP (page 39).