Справочник Пользователя для Dixon 6025
Page
12
SPECIFICATIONS
Model ZTR 3304
CHASSIS:
Twin 12 gauge side frames and 7 gauge transmission and engine base plate.
BODY:
All body parts are made of rotational molded polyethylene. Front body contains
access panel for battery service. Seat tilts forward to allow transmission service.
MOWER DECK:
11 GA stamped steel construction.
Single 30" cut blade.
Cut height approximately 1" to 4" via 7 position lift handle.
BLADE DRIVE:
Mechanical; hand lever engagement.
TRANSMISSION:
Each rear wheel is independently driven by chain and sprockets through a
friction mechanical drive.
ENGINE:
14.5 HP Briggs & Stratton I/C Quiet, 4-Cycle, Single Cylinder, Air-Cooled,
Gasoline, Vertical Shaft, Cast Iron Cylinder, Synchro-Balanced, Laminated
Shroud
STARTING SYSTEM:
Electric by key switch operation with safety interlocks on parking brake and
blade drive.
TIRES:
Front
11 X 4.00-5 ribbed tread.
Rear
16 X 6.50 X 8 Turf Trac R/S tread.
RECOMMENDED
Front
16-21 PSI
TIRE PRESSURE:
Rear
8-14 PSI
CAPACITIES:
Fuel
2.0 gallons total.
Engine
1.25 quarts oil.
DIMENSIONS:
Width
32.5" outside rear wheel measurement.
Height
32.0" to top edge of seat.
Length
65.5" hitch tab to front bumper.
Weight
440 lbs.
NOTE:
Additional information provided in service instructions under the individual
component.
component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.