Справочник Пользователя для Linksys C260

Note: Installation of the baffle bricks and insulating blanket 

is easier when you can still access the flue outlet, (before 

connecting the flue pipe). Be sure the insulating blanket 

that it does not hang out over the front of the baffle. Use 

a ruler or a piece of kindling to reach over the blanket to be 

sure it is completely flat on top of the baffle bricks.

 

1.  Install bricks #1-28 in the numbered sequence shown 

in Figure 1.            

2.  Next, install bricks #29 & 33 on top of the rear stain-

less steel baffle support (Figures 2 and 3) in the 

upper back part of the firebox.

3.  Install bricks #34-38 by sliding the back of one brick 

at a time over the top of the rear stanless baffle.

4.  Next, install the insulating blanket on top of the baffle 

bricks by carefully sliding it in from the front.

(see Figures on this page)

A = 4-1/4” x 9” 

F = 4-1/2” x 9”

B = 4-1/4” x 5-1/2” 

G = 2-1/8” x 4-1/4”

C = 4-1/2” x 5-1/2” 

H = 4-1/4” x 4-1/2”

D = 2-1/8” x 6-1/4” 

S = 2-1/8” x 9”

E - 1-3/4” x 9”

Insulating Blanket Size is 1” x 15-1/2” x 22-1/2” and fits on 

top of the baffle brick.