Справочник Пользователя для Shark SC505

Your Hand Held Steam Cleaner utilizes pressurized steam to remove tough grease,dirt 
and grime. 

Steam is nature’s purest and most powerful cleaner for safely cleaning all hard 

surfaces in your home without harsh chemicals, thus being perfectly ecological. The appliance has 
various attachments so that it can be used for many purposes such as:

1. Clean upholstery, sealed grout, bathroom/kitchen tile, stovetops.
2. Easy to clean difficult to reach areas with the angle adapter or concentrator such as 

faucets, etc.

3. Ideal for windows, mirrors, glass doors, etc.
4. Clean fabrics, window  coverings, pillows, bedding etc.
5. Clean hard surface areas such as counters, sinks, shower door tracks, etc.

Do not plug in the machine during filling.  Use a grounded 
receptacle.  Use only a heavy duty extension cord rated for 15 

amps - Do not use an ordinary extension cord.

Do NOT add cleaning solutions, scented perfumes, oils or 
any other chemicals to the water used in this appliance. 

Your Hand Held Steam Cleaner is designed to clean hard 

surfaces and upholstery that will withstand high heat. Do not use on soft 

plastics,unsealed wood and cold glass. On surfaces that have been treated with 

wax or some no  wax floors, the sheen may be removed by the heat and steam 

action. Do not use on unsealed wood. This could cause the wood grain to rise. It 

is therefore recommended to test an isolated area of the surface to be cleaned 

before proceeding.

When attaching or removing hose or concentrator from the main unit, an integrated 
safety is engaged preventing the user from inadvertently releasing hot steam. Always 
release the locking trigger button before removing accessories.

This is normal due to pressure build up inside of accessories during use.
When refilling the water tank, ensure that either the steam concentrator or steam hose is 

attached to main unit.
To refill, unplug, unit from electrical outlet, depress trigger until all remaining 

pressure/steam has been allowed to escape from the tank, and allow to cool for 5 

minutes. Carefully open the safety cap. Once cool, refill, replace safety cap and re-plug 

into electrical outlet. Resume work.

Step 1: Before filling the steam cleaner, 

make sure that the unit is NOT 

plugged in.

Step 2: Press locking trigger to ensure 

all internal pressure is released.

Step 3: Turn Safety Cap counter 

clockwise until removed.

Step 4: Release locking trigger.

Step 5: Add water using the filling flask 

provided.  Do not overfill.

Replace Safety Cap by turning 

clockwise - press down firmly to 

tighten. Heating time is 

approximately 6 minutes. Filling 

the boiler with hot water will 

shorten heat up time.

Step 6: Plug the unit into a standard 

120 volt grounded wall 

receptacle. The power “On” 

light (Red) will light up. 

Step 7: Allow approximately 6 minutes 

for water vapor to reach its 

working temperature and 

pressure.  When unit is ready 

for use the red light will change 

to Green. 

Step 8: At the start, some water will 

come out from the nozzle. This 

is normal.

NOTE: Disconnect steam cleaner from 

wall outlet before refilling. It is time to refill 

your steam cleaner when there is no more 

steam coming out of the nozzle.  Because 

the water tank is pressurized, use caution 

when opening to refill. Depress the trigger 

button while you unscrew the safety cap 

counterclockwise. Always let unit cool for 

5 minutes before refilling the unit with 

water. 

Using the Locking Trigger Button
The steam cleaner has a locking trigger 

button. The trigger will lock when you 

have pushed it all the way. To unlock 

the trigger, just press down on the 

trigger release and the trigger will pop 

up, stopping the flow of steam.

Always insure that the 

unit is “UNPLUGGED” from the wall 

receptacle prior to initial filling or re-filling 

the water tank. Never attempt to fill this 

unit under a water tap, always use the 

filling flask provided. Failure to follow  

these steps will cause the water tank to 

overfill and may pose an electrical safety 

hazard.

Step 1: Disconnect electrical power 

cord from wall outlet.

Step 2: Press trigger button until all 

pressure has been released. 

Step 3: Allow the unit to cool for 

approximately 5 minutes 

before refilling with water.

Carefully unscrew safety cap.

Step 4: Slowly pour water using the 

filling flask into the boiler.DO 

NOT Fill Under a faucet, use 

NOT OVERFILL. Always 

Step 5: Release the locking trigger.

Step 6: Screw safety cap back on the 

appliance and plug appliance 

back into wall outlet. Steam will 

start to be produced as before.

WARNING: This appliance is under 

pressure. After every use, press 

trigger button until all 

pressure has been released before 

removing safety cap. Either 

concentrator nozzle or hose must be 

connected in order for the trigger to 

operate. Allow unit to cool for three (3) 

minutes before refilling.