Справочник Пользователя для Pelco C501M-B (10/97)
Pelco Manual C501M-B (10/97)
1-1
1.0 WARNINGS
1.1 IMPORTANT SAFEGUARDS
Before installing your equipment, please read the fol-
lowing important safeguards as outlined by Underwrit-
ers Laboratories Inc.
lowing important safeguards as outlined by Underwrit-
ers Laboratories Inc.
Read Instructions
All the safety and operating instructions should be read
before the appliance is operated.
All the safety and operating instructions should be read
before the appliance is operated.
Retain Instructions
The safety and operating instructions should be retained
for future reference.
The safety and operating instructions should be retained
for future reference.
Heed Warnings
All warnings on the appliance and in the operating in-
structions should be followed.
All warnings on the appliance and in the operating in-
structions should be followed.
Follow Instructions
All operating and use instructions should be followed.
All operating and use instructions should be followed.
Cleaning
Do not use liquid cleaners or aerosol cleaners. Use a
Damp Cloth for cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
Damp Cloth for cleaning.
Attachments
Do not use attachments not recommended by Pelco as
they may cause hazards.
Do not use attachments not recommended by Pelco as
they may cause hazards.
Water and Moisture
Do not use this CCTV product near water - for example,
near a kitchen sink, wash bowl, bath tub, sprinkler, in a
wet basement or near a swimming pool, and the like
unless it is specifically marked “for use in wet loca-
tions”.
Do not use this CCTV product near water - for example,
near a kitchen sink, wash bowl, bath tub, sprinkler, in a
wet basement or near a swimming pool, and the like
unless it is specifically marked “for use in wet loca-
tions”.
Accessories
Do not place this CCTV product on an unstable cart,
stand, tripod, bracket, or table. The CCTV product may
fall, causing serious injury to a child or adult, and seri-
ous damage to the appliance. Use only with a cart, stand,
tripod, bracket or table recommended by Pelco, or sup-
plied by Pelco with the product. When mounting the
appliance, follow Pelco’s installation instructions, and
use only mounting accessories recommended by Pelco.
Do not place this CCTV product on an unstable cart,
stand, tripod, bracket, or table. The CCTV product may
fall, causing serious injury to a child or adult, and seri-
ous damage to the appliance. Use only with a cart, stand,
tripod, bracket or table recommended by Pelco, or sup-
plied by Pelco with the product. When mounting the
appliance, follow Pelco’s installation instructions, and
use only mounting accessories recommended by Pelco.
Cart & Stand
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination
to overturn.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination
to overturn.
Ventilation
Slots and openings in the cabinet are provided for ven-
tilation and to ensure reliable operation of the CCTV
product, and to protect it from overheating. These open-
ings must not be blocked or covered. The openings
should never be blocked by placing the CCTV product
on furniture, carpet, or similar surfaces. The CCTV
product should never be placed near or over radiators
or heat registers. This CCTV product should not be
placed in a built-in installation, such as a book case or
rack unless proper ventilation is provided or Pelco’s
installation instructions are adhered to.
Slots and openings in the cabinet are provided for ven-
tilation and to ensure reliable operation of the CCTV
product, and to protect it from overheating. These open-
ings must not be blocked or covered. The openings
should never be blocked by placing the CCTV product
on furniture, carpet, or similar surfaces. The CCTV
product should never be placed near or over radiators
or heat registers. This CCTV product should not be
placed in a built-in installation, such as a book case or
rack unless proper ventilation is provided or Pelco’s
installation instructions are adhered to.
Power Sources
This CCTV product should only be operated from the
type of power source indicated on the marketing label.
If you are not sure of the type of power supply to your
installation location, consult your local electrical build-
ing official or power company. Refer to the operating
instructions for appliances intended to operate from
battery or other power sources.
This CCTV product should only be operated from the
type of power source indicated on the marketing label.
If you are not sure of the type of power supply to your
installation location, consult your local electrical build-
ing official or power company. Refer to the operating
instructions for appliances intended to operate from
battery or other power sources.
Grounding
This CCTV product is equipped with a 3-wire “ground-
ing” type plug, having a third (grounding) pin. This plug
will only fit into a “grounding” type power outlet. This
is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the “grounding” type plug
since it is provided to ensure your safety.
This CCTV product is equipped with a 3-wire “ground-
ing” type plug, having a third (grounding) pin. This plug
will only fit into a “grounding” type power outlet. This
is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the “grounding” type plug
since it is provided to ensure your safety.
Power-Cord Protection
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Overloading
Do no overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
Do no overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into this CCTV product
through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
CCTV product.
Never push objects of any kind into this CCTV product
through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
CCTV product.
Servicing
Do not attempt to service this CCTV product yourself
as opening or removing covers may expose you to dan-
gerous voltages or other hazards. Refer all servicing to
qualified service personnel.
Do not attempt to service this CCTV product yourself
as opening or removing covers may expose you to dan-
gerous voltages or other hazards. Refer all servicing to
qualified service personnel.