Справочник Пользователя для Pelco C1665M-A
2
C1665M-A (1/06)
Description
The TW3004P is a four-channel passive video transceiver that can transmit multiple video signals
over unshielded twisted pair (UTP) cable. The transceiver can be mounted into a fi ber rack
(RK5000PS-3U/RK5000-3U). Each transceiver has four rubber feet allowing you to place it on a fl at
surface, such as a desk or shelf.
over unshielded twisted pair (UTP) cable. The transceiver can be mounted into a fi ber rack
(RK5000PS-3U/RK5000-3U). Each transceiver has four rubber feet allowing you to place it on a fl at
surface, such as a desk or shelf.
The transceiver can be used at the camera and/or monitoring location. It allows for easy connectivity
with any video source or destination device, such as cameras, monitors, and matrix switchers. This
multi-channel transceiver will transmit video (color/black and white) and Coaxitron
with any video source or destination device, such as cameras, monitors, and matrix switchers. This
multi-channel transceiver will transmit video (color/black and white) and Coaxitron
®
(up the coax) PTZ
control signals on the same pair of UTP wires.
Although the transceiver is passive and requires no power, the Pelco badge on the front of the unit
illuminates when inserted into a fiber rack. The transceiver has built-in surge suppression.
illuminates when inserted into a fiber rack. The transceiver has built-in surge suppression.
PARTS OF THE TRANSCEIVER
Figure 1.
TW3004P Parts
Pelco Badge
BNC Connector (4)
4-Pin Power Connector
Rubber Feet (4)
8-Pin Terminal Block Connector
1
2
3
4