Справочник Пользователя для Pelco FR85041

 

3500 Pelco Way • Clovis, California 93612 USA

 

• Tel: 800/289-9100 • Fax: 800/289-9150

 

• Tel: 1-559/292-1981 • Fax: 1-559/348-1120

 

Pelco and the Pelco logo are registered trademarks of Pelco.

©Copyright 2006, Pelco. All rights reserved.

 

The materials used in the manufacture of this document and its components are 
compliant to the requirements of Directive 2002/95/EC.

 

C1645M-A ADDEN

 

September 14, 2006

 

FT85041/FR85041 Fiber Transmitter and Receiver 
Installation Manual – 

 

Attachment of Ferrite to Data Cable of FT85041/
CT85041 Transmitter

A snap-on ferrite is supplied with the 
FT85041MSTR/CT85041MSTR, FT85041SSTR/
CT85041SSTR, and FT85041SFCR/CT85041SFCR 
transmitters. The ferrite must be attached to the 
data cable of the transmitters to comply with FCC 
and CE emissions requirements.

After the data connections are made to the data 
connector on the transmitter, attach the ferrite to 
the data cable. When attaching the ferrite to the 
cable, position the ferrite as close as possible to 
the transmitter.

 

  The ferrite should fit securely around the 

cable. If the ferrite is loose and slides along the 
cable, loop the cable through the ferrite before 
closing the ferrite. If, however, the thickness of 
the cable prevents the ferrite from closing, use a 
tie wrap to hold the ferrite in place rather than 
looping the cable.