Листовка для Insignia NS-A700PF6

Скачать
Страница из 2
RESETTING YOUR FILTER INDICATOR
Note: These are the most common filter reset instructions. If the instructions 
don’t work for your refrigerator brand, see the documentation that came with 
your refrigerator.
TROUBLESHOOTING
STORAGE AND MAINTENANCE
•  Replace your filter every three to six months to prevent bacteria and 
fungus growth in your filter, supply lines, and storage tank.
•  Stored filters do not expire. Keep your unused filters in a cool, dark, and 
dry place until you need them.
•  If you do not use your water dispenser for more than four days, run two 
gallons of water before using it to prevent bad tasting water.
•  The filters are lubricated with a safe, USDA grade silicone. You do not need 
to lubricate the gaskets or receiver before installing.
V3 ENGLISH 14-1039
RECYCLING YOUR USED INSIGNIA FILTER
Help the environment by recycling your used Insignia filter at your local 
recycling facility or mail it to:
 Insignia 
Filters
  2678 Ram Bay Road
  Manning, South Carolina 29102
ONE-YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
CERTIFICATIONS: <SGF-M9, SGF-LB60, SGF-DA20B, SGF-LA07>
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
REFRIGERATOR 
BRAND
Amana®
GE or Hotpoint
Samsung
LG
Kenmore
Maytag® and 
Jenn-Air®
Whirlpool® and 
Kitchen Aid®
INSTRUCTIONS
Press and hold the dispenser lock and auto light buttons at the 
same time. When the filter indicator flashes (about four seconds), 
release both buttons.
OR
Press and hold the dispenser lock and water buttons at the same 
time. When the filter indicator flashes (about four seconds), release 
both buttons.
OR
Press and hold the dispenser lock and auto light buttons on the 
dispenser (at the same time) for 4 seconds until the filter status 
indicator begins to flash, and then release the buttons. On 
some Amana fridges you need to press the dispenser lock and 
water buttons for 4 seconds until the filter status indicator begins 
to flash, and then release the buttons. 
Press and hold the reset water filter button on the dispenser for 
three seconds.
Press and hold the ice type and child lock buttons for three 
seconds. The water filter indicator should turn green.
Note: Only hold these buttons for three seconds. Holding these 
buttons for five seconds cancels the reset. If you cancel the reset, 
repeat the instructions above again.
Press and hold the reset button for three seconds.
The water filter reset for Kenmore refrigerators varies by model. 
See the documentation that came with your refrigerator.
Press and hold the lock and light buttons (lock and water on newer 
fridges) on the dispenser for about 4 seconds, until the indicator 
light blinks. 
Press the light switch 5 times within 10 seconds. If the fridge has a 
filter button, press and hold it for 5-10 seconds
PROBLEM
My refrigerator is 
not dispensing 
water
My water 
dispenser is 
dripping
My water is cloudy 
or contains black 
carbon pieces
My new filter is 
making noises or 
sputtering
My water tastes 
bad
SOLUTION
• Make sure that you soaked your filter in water for 15 minutes before 
installing.
• Make sure that the filter is securely connected to the receiver. Do not 
use tools to tighten the filter in place.
• Make sure that the water line to the refrigerator is turned on. The 
valve must be completely open for the refrigerator to receive water.
• Make sure that the refrigerator door is closed or the dispenser will not 
work.
• A few drops are normal. If the water is dripping constantly, have a 
service technician check your refrigerator’s water valve.
• Cloudy water is caused by microscopic air bubbles. Run two to three 
gallons of water from your dispenser to clear the air bubbles out.
• Black carbon pieces in the water are normal and appear with all 
carbon filters. Run two to three gallons of water through your 
dispenser to remove loose carbon pieces.
• Make sure that you soaked your filter in water for 15 minutes before 
installing.
• Noises and sputtering are caused by trapped air pockets. Run two to 
three gallons of water from your dispenser to push the air out.
• If you do not use your water dispenser for more than four days, run 
two gallons of water through the dispenser before using it.
• Make sure that you replace your filter every three to six months to 
prevent bacteria growth.
C
M
Y
CM
MY
CY
CMY
K
NS-A700PF6_A700PF6-2_A8001F6_A8001F6-2_LT600B-2_DA2920_DA2920-2_14-1039_QSG_V3_EN.ai   2   9/16/2014   4:29:12 PM
NS-A700PF6_A700PF6-2_A8001F6_A8001F6-2_LT600B-2_DA2920_DA2920-2_14-1039_QSG_V3_EN.ai   2   9/16/2014   4:29:12 PM