Справочник Пользователя для Panasonic VDR-D300

Скачать
Страница из 180
49
LSQT1011
Reco
rd
in
g
Before recording
∫ About auto mode
Set the AUTO/MANUAL/FOCUS switch to AUTO, 
and color balance (white balance) and focusing will 
be adjusted automatically.
– Auto white balance (l 163)
– Auto focusing (l 164)
Depending on the brightness of the subject etc., the 
aperture and shutter speed are automatically 
adjusted for an optimum brightness. 
(When set to the disc recording mode: The shutter speed is adjusted to a maximum of 1/250.)
≥ Color balance and focus may not be adjusted automatically depending on light sources or 
scenes. If so, manually adjust these settings.
– Scene mode setting (l 70)
– White balance setting (l 73)
– Shutter speed setting (l 75)
– Iris/gain value setting (l 75)
– Focus setting (l 72)
∫ Auto Ground-directional Standby (AGS) (VDR-D300 only)
This function prevents unnecessary recording when you forget to pause 
recording and walk with the unit tilted upside down while recording continues. 
≥ If the unit continues to be tilted upside down from the normal horizontal 
position while recording on a disc, it is automatically set to recording pause.
Turning the AGS function on/off
¬
Rotate the mode dial to select 
.
Press the MENU button, then select [
SETUP]
 # 
[
AGS]
 # [ON] or [OFF] and press the joystick.
≥ The AGS function may activate and cause the unit 
to pause the recording if you are recording a subject 
right above or right below you. In these cases, set 
[AGS] to [OFF] then continue the recording.
≥ Use the recording start/stop button to pause the 
recording. The AGS function is only a backup 
function for when you forget to pause the recording. 
≥ The time it takes the unit to be put into recording 
pause after being tilted upside down varies 
depending on the operating conditions.
AGS
D250&300(P_PC)eng.book  49 ページ  2006年1月20日 金曜日 午後2時3分