Справочник Пользователя для Philips Colour Observation Camera

Pick-up element 

1/3" solid state CCD

Pixel elements 5

12 (H) x 582 (V), PAL interlaced, or 512(H) x 492 (V), NTSC
interlaced

Resolution 330 

TVL

Gain control 

automatic

Lens 

See: Using a different lens

Iris Electronic 

iris

When connected, an auto-iris lens overrides the electronic iris.

Light sensitivity 

• 0.3 lux minimally acceptable picture with standard lens (F1.2)

at 3200K, transmission 86%, scene reflection 100%

• 0.5 lux, 50ire (-6dB) with standard lens (F1.2) at 3200K,

transmission 86%, scene reflection 100%

Scene illumination 

Not for continuous use above 2k lux with standard lens (F1.2)
For outdoor use an auto-iris lens is recommended.

Signal to noise ratio 

48dB at 200-25000 lux, 25°C

White balance TTL 

range 2500-6500K

System connector (output) 

RJIIE plug

Microphone 

Built-in, can be switched off at the camera.

• Frequency range 

300-3000Hz

Synchronisation 

The camera automatically synchronises to the system monitor.

Power supply 

24VDC, when the system-cable length exceeds 200m/600ft a power-
adapter (24VDC, current limit 500mA) is required (available as
accessory)

Power consumption 

≤

3W

System-cable length 

max. 300m/900ft (when a mains power adaptor is used)

Dimensions 

72,5 (H) x 70 (W) x 60 (D) mm (excl. lens)

Weight 190g
Connectors

• System cable 

RJ11E modular ("telephone" plug)

• External power 

Power jack

Auto-iris control 

4-pole socket, passive Auto-iris, direct drive

Mounting 

1/4" 20 UNC

Ambient temperature

• Operating 

-10 to +50°C

• Storage 

-25 to +70°C

Ambient humidity

• Operating 

20 to 90% RH

• Storage 

up to 99% RH

CL 66610005_309.AI

4 2

3 1

The pin connections of the auto-iris connector are:
pin 1 = control coil -
pin 2 = control coil +
pin 3 = drive coil -
pin 4 = drive coil +