Справочник Пользователя для Mitsubishi Electronics Q13UD(E)HCPU

172

The following table lists PLC parameters need to be set for a Basic model QCPU, High Performance QCPU, or 
Process CPU.

*3

For a Basic model QCPU,  the online module change setting is disabled.
High Performance model QCPUs do not support the online change function. To replace a module controlled by a 
Process CPU online, check the "Enable Online Module Change with Another PLC." checkbox.

I/O Assignment

I/O 
Assignment

Type

-

Qn(H)/QnPH/QnPRH 
User's Manual (Function 
Explanation, Program 
Fundamentals)

Model Name

-

-

Points

-

Start XY

-

Base Setting

Base Model Name

-

-

Power Model Name

-

-

Extension Cable

-

-

Slots

-

Switch Settings

-

-

Detailed 
Settings

Error Time Output Mode

-

-

PLC Operation Mode at H/W Error

-

-

I/O Response Time

-

-

Control PLC

PLC System

Points Occupied by Empty Slot

-

Qn(H)/QnPH/QnPRH 
User's Manual (Function 
Explanation, Program 
Fundamentals)

Multiple CPU 
Setting

No. of PLC

Operation Mode

Online Module Change

*3

All CPUs Can Read All Inputs

All CPUs Can Read All Outputs

Communication Area Setting
(Refresh Setting)

CPU Specific 
Send Range

PLC Side Device

-

*1

: Item that must be set in a multiple CPU system (A system does not operate without setting.)

: Item that is set if needed in a multiple CPU system

- : Item that is the same as in a single CPU system

*2

: Item that must have same settings among all the CPU modules in a multiple CPU system

: Item that must have same settings among all the QCPUs and PC CPU module in a multiple CPU system

(item that is not supported in Motion CPUs)

- : Item that can be set individually for each CPU module in a multiple CPU system