Справочник Пользователя для Philips VRA231AT
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
34 Timer Recording with the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
programming numbers in your TV guide. Before you begin:
●
Set up the channels at the VCR (page 12).
●
Set up the VCR Plus+ and Cable/TV channel numbers (pages
32 - 33).
32 - 33).
●
Set the clock (page 15).
●
Put a tape in the VCR.
●
Make sure the VCR light appears on the display panel. If it does
not, press the VCR/TV button once.
not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
2
Press the VCR PLUS+ button.
3
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD/B button.
a ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD/B button.
●
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
choose, up to 12 months away.
●
DAILY: The VCR will record a program every day from
Monday to Friday – starting at the same time and recording for
the same length of time.
Monday to Friday – starting at the same time and recording for
the same length of time.
●
WEEKLY: The VCR will record a program on the same day, at
the same time, and for the same length of time every week.
the same time, and for the same length of time every week.
• CODE ERROR may flash on-screen
after step 3 if you enter an incorrect
PlusCode programming number (for
example, one that is too short). The
previous screen will appear. Enter
the correct PlusCode programming
number.
PlusCode programming number (for
example, one that is too short). The
previous screen will appear. Enter
the correct PlusCode programming
number.
• If CLASH flashes on-screen after step
3, the timer recording you just pro-
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
• You may use the VCR Plus+
Programming System to record pro-
grams on Cable TV channels up to
channel 99.
grams on Cable TV channels up to
channel 99.
• If the VCR PLUS+ CROSS REF. MAP
reappears after step 3, the VCR
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
Helpful Hints
VCR PLUS+ PROG.
→
ONCE
DAILY
WEEKLY
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
TO END PUSH EXIT
3
2
4
1
Press the VCR button.
1
VOL
CH
3
2
1
6
5
4
9
8
7
0
POWER
STATUS/EXIT
MEMORY
REC/OTR
SPEED
VCR PLUS+
ALT. CH
PAUSE/STILL
MUTE
TV
VCR
F.FWD
REW
PLAY
STOP
VCR/TV
EJECT
MENU
CLEAR